pdscan
Member
Can someone here please help with the ct tones on my Pro-96.I programed Opp Whitby and Durham in manual but still get the noise HELP! Thanks Paul.
-
Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.
We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.
If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html
Pro 96 Help!
- Thread starter pdscan
- Start date
- Status
Did you close the bank? If it's in open mode, the tone won't matter. You need to set the bank to closed mode (it will show a '-' instead of '+' while scanning) for the PL tones to work.
pdscan
Member
Pro -96
Thanks Forts , That did the trick, Thanks for the quick reply. Im used to old scanners like Pro-2006 and 2021 . I have had pro-96 for 2 days now and have lots to learn. Thanks again Paul.
Thanks Forts , That did the trick, Thanks for the quick reply. Im used to old scanners like Pro-2006 and 2021 . I have had pro-96 for 2 days now and have lots to learn. Thanks again Paul.
No problem, enjoy your new toy!!
jellotor
Member
Just FYI, the Durham site is for Durham, ONTARIO (Hwys 4 & 6) and not Durham REGION. Sometimes that trips folk up...pdscan said:
pdscan
Member
Pro-96
Jellotor. Yea I tripped all over that. Thanks Paul.jellotor said:
- Status