Pro 97 Question

Status
Not open for further replies.

_DeS_

Member
Joined
Jun 6, 2006
Messages
138
Location
Cape Breton Regional Municipality
Just a quick question as I couldnt find anything stating that the Pro 97 supports control channel mode. Im curious if the 97 actualyl does support jsut programing in the control channels or do I have to program them all assocaited with that site....

Thanks
 

KE5BCP

Analog Texan
Premium Subscriber
Joined
Dec 19, 2002
Messages
1,339
Location
Lewisville, Texas
Page 65 of the .pdf:
"Your PRO-97 automatically calculates Motorola voice
channel frequencies when it decodes the control channel.
This eliminates the need to enter all the Motorola group
frequencies."
 

_DeS_

Member
Joined
Jun 6, 2006
Messages
138
Location
Cape Breton Regional Municipality
W5JSS said:
Page 65 of the .pdf:
"Your PRO-97 automatically calculates Motorola voice
channel frequencies when it decodes the control channel.
This eliminates the need to enter all the Motorola group
frequencies."
Thanks for the reference to the page # in the .pdf...I would of refered to it if I had it ;)
but means I didnt I figured the next best thing to the manual would be tapping the expertise of members like your self....

Thank you kindly for the reply...
 

VintageJon

Member
Joined
Mar 1, 2005
Messages
569
"PRO-97 automatically calculates Motorola voice..."

Gadzooks! Is that to say that it WILL do APCO25 and STARNET?

-Jon
 

hiegtx

Mentor
Premium Subscriber
Joined
May 8, 2004
Messages
7,797
Location
Dallas, TX
VintageJon said:
"PRO-97 automatically calculates Motorola voice..."

Gadzooks! Is that to say that it WILL do APCO25 and STARNET?

-Jon
Jon, I think that's just a PR guy's way of writing that the Pro-97 does "control channel only". It won't do APCO-25. It would, of course, handle STARNET until somebody does actually start using digital radios on the system (from the various STARNET posts, that's apparently not the case right now, at least from what I've read).
 
Status
Not open for further replies.
Top