PRO2006

[bigpapaw]

Good Evening:
I came across this scanner and was wondering just what all the FREQS I can put in this. I know its an older PRO.
I would appreciate any answers on this.
Thanks

 

[puzzleriddle]

http://www.google.com/url?sa=t&rct=...0HpB7Gc9tVQ7hkqBFGQsVJA&bvm=bv.57155469,d.eW0

 

[KC4RAF]

Your Pro-2006 will receive

the following freqs:


25-520 MHz

760-823.945 MHz

851-868.945 MHz

896-1300 MHz

Here's the manual link:

http://www.repeater-builder.com/radio-shack/pro-200x/pro-2006-om.pdf

Some where there is an easier manual, just can't remember the link.

Here's an interesting, short, read on the 2006:

http://wiki.radioreference.com/index.php/Pro-2006

 

[fxdscon]

http://www.google.com/url?sa=t&rct=...0HpB7Gc9tVQ7hkqBFGQsVJA&bvm=bv.57155469,d.eW0

That link is for the Pro-106. The OP has a Pro-2006

.

 

[fxdscon]

Good Evening:
I came across this scanner and was wondering just what all the FREQS I can put in this. I know its an older PRO.
I would appreciate any answers on this.
Thanks

Great find..... Great scanner... I still use 6 of them.


http://forums.radioreference.com/at.../39928-dont-laugh-pro-2006-ce-232-2006_ad.jpg





.

 

[bigpapaw]

PRO 2006

Thanks for responding.

 

[WILSON43]

Amazing to see that these were 400 bucks over twenty years ago. So, the new Unidens coming out in January are not that expensive in comparison, are they....

 

[SCPD]

Just realize that the PRO-2006 is limited in its frequency steps. Newer systems require 6.25 khz steps and so you may not get the best signals on certain frequencies.

I modified mine for discriminator output and it's really solid for that specific use but it can't handle 700 Mhz systems for decode as well as some newer systems that use the 6.25 khz steps.

 

[fxdscon]

Amazing to see that these were 400 bucks over twenty years ago. So, the new Unidens coming out in January are not that expensive in comparison, are they....

http://forums.radioreference.com/co...nch-bcd536hp-bcd436hp-radios.html#post2075541

.