Pro2035/2042 10 Segment LED S Meter

Status
Not open for further replies.

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,479
Location
NJ USA (Republic of NJ)
Has anyone ever installed(i know someone out there has) one of those 10 segment LED S Meter mods like for the 2006 into a Pro2035 or Pro2042? If so I am looking for the tap point for the signal strength. I thought I had a service manual for the 2042 but I can not seem to find it. Any info on this would be appreciated especially if you have a picture you could post or send. TIA.....
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,479
Location
NJ USA (Republic of NJ)
jack103 said:
Thanks, but I have that info and it does not help me. I need the physical connection point on the 2042 pc board. The 2006 that point is TP5 but the 2042 has no TP5. I read Bucko's post regarding using the anode of D34 for his older style s meter but that does not seem to work for this 10 segment LED s meter application.
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,479
Location
NJ USA (Republic of NJ)
Bump

Come on folks - someone out there must know something. So far I have seen several s meter mods on the web and some say D34 Anode and other say D34 cathode. These parts are real small so even if I positive ID the part I will still need to know which side is the anode and cathode.
 
Status
Not open for further replies.
Top