- Joined
- Feb 15, 2011
- Messages
- 24
After reprogramming with both ARC96 and Win 96 to make the PRO96 work with the new Linn Co (Iowa) P25 system, three local PRO96 users have discovered they aren't getting any TG ID information displayed, even though the scanners appear to be working well with the new system.
The display always shows the bank ID (Link County) on both bottom lines of the display.
Conventional channels (ham and aircraft) appear to display properly.
We have collectively tried every selection we could find in both ARC96 and Win96 and nothing seems to change the display.
I'll dump everything and go back to the old file and try to rebuild from there.
Any suggestions would be appreciated!
73
Jim w0nkn
The display always shows the bank ID (Link County) on both bottom lines of the display.
Conventional channels (ham and aircraft) appear to display properly.
We have collectively tried every selection we could find in both ARC96 and Win96 and nothing seems to change the display.
I'll dump everything and go back to the old file and try to rebuild from there.
Any suggestions would be appreciated!
73
Jim w0nkn