Pro97 Trunking Help

[Hover_X]

I have a Pro97 and got it programmend last November and it was working great through early February. I have not used it since early February and now it does not appear to properly receive any of my trunked channels.

I thought the control frequencies may have changed, so I added all the 800 freqs in the Bank, but it still is not working.

If I set the 800 freqs to FM instead of MO, they receive during a scan, but of course there are no talk groups associated with the reception. When I cange the freqs to MO and scan I get nothing. So this would indicate that the frequencies that I have programmed are correct. What may be wrong?

Please help.

 

[SCPD]

give link to the system, They're are "several" in or near Everett

 

[Hover_X]

Scanner Frequencies: Snohomish County Emergency Radio (SERS) Trunking System, Everett, Washington

 

[SCPD]

pick the site closest to you & program it as shown in the DB, each channel ( frequency) as MO & bank mode to MO. I believe you will be best off by programing the Simulcast sites. you will want to check in the Washington forum, these frequencies are due to be rebanded also. And the (pro 97 will not pickup The APCO 25. but all the talk Groups I see are showing analog

 

[Hover_X]

I have all of that programmed and it was working fine. Now something is not right because it will not work in trunking mode. I'm sure it is a setting that I am missing. Any info will help. I can get the freqs to work in FM mode though.

 

[Hover_X]

Well, it appears to be working now. As I suspected it was a case of operator error... doh!

It appears that I had inadvertently locked out one or more of the conhtrol channels.

As always, thanks for the responses.

Dan