Problem w/ EchoFilter Souncard Settings

[RyltnVFD]

I have been attempting to configure EchoFilter to work with my soundcard, so I can get A/B tone freqs and durations. However, I try and try to get it set up correctly, and I can't hear any audio coming out of my speakers. I've checked all my connections and volumes, and they seem correct.

My soundcard is a Realtek AC97, and I am running Windows XP with more than enough CPU power. The soundcard has two lines going in, microphone and line in. There is one line going out, for speakers.

I have my PRO-96 connected to the Line In.

Any suggestions on soundcard settings?

 

[Al42]

Open your audio mixer. Options/Properties. Check "Recording". Make sure "Line In" is checked. Click OK. Turn up the Line In level.

 

[RyltnVFD]

I checked those settings, and they are all as should be, but I am still having problems. Anybody have any other suggestions?

 

[SCPD]

Anybody have any other suggestions?

What are your "recorder" tab settings?

-rick

 

[Al42]

Anybody have any other suggestions?

What are your "recorder" tab settings?

-rick

And playback. I believe that, in order to hear the line in, line in on the playback side has to be turned up.

 

[RyltnVFD]

Everything is turned up, and I still can not hear a thing.

 

[flyingwolf]

I am assuming this is onboard sound and as such is bare minimum.

Chances are your soundcard may not support Duplexing. It cannot pipe the incomming signal tothe speakers realtime.

Have seen this on many lower end and cookie cutter systems.

 

[Joseph11]

I have an AC'97, it supports duplexing.