• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Problems with speaker microphones on the VX-454 VHF

Status
Not open for further replies.

dkabal

Member
Premium Subscriber
Joined
Jan 14, 2012
Messages
8
Location
Boulder, CO
My employer's ambulances use the VX-454 VHF (brand new) for communication when outside the vehicle.

I personally purchased a MH-360S and a couple of MH-45B4B speaker microphones for use with these radios, and they do not work, specifically, they broadcast dead air when the PTT button on them or the main portable PTT button is depressed.

The speaker function seems to work fine, but they are useless as microphones

I have been told this may be a programming issue, please could someone with experience with these radios confirm and point me in the right direction.

Thanks,
Dave
 

RodStrong

Member
Joined
Nov 11, 2007
Messages
1,173
Location
West
Call Tom with Red Dog Radios. He will walk you through whatever issue you are having. His shop is right down the road from Boulder in Louisville. He is also likely your nearest authorized Vertex warranty repair shop. Good luck.

Red Dog Radios
 

dkabal

Member
Premium Subscriber
Joined
Jan 14, 2012
Messages
8
Location
Boulder, CO
Thanks, I'll give Tom a call Monday.

I downloaded the (free) CE115 software to see if there was anything about enabling the speaker microphone. I see two possible settings that might interfere with correct operation of the external speaker microphone:

Speaker Microphone vs. Speaker Microphone (DC)
External microphone gain

Anyone have experience with VX-45x series and genuine Vertex external speaker microphones? (MH-360S and MH-45B4B)

Thanks in advance,
Dave
 

bryanknj

Member
Joined
Sep 7, 2005
Messages
18
We have multiple radios of this line (VX454, VX459) in service at my department, and have not experienced the same problem you are describing yet. I also personnaly use these radios, and am very happy with them. If you want to send me your codeplug, send me a PM, and I will reply with my email. I will take a look at it, and see if I notice anything in the codeplug that could be causing the problem.
 

dkabal

Member
Premium Subscriber
Joined
Jan 14, 2012
Messages
8
Location
Boulder, CO
We have multiple radios of this line (VX454, VX459) in service at my .... If you want to send me your codeplug, send me a PM, and I will reply with my email. I will take a look at it, and see if I notice anything in the codeplug that could be causing the problem.

Thanks, I will be sure to send it. I don't have access to the program yet. I just purchased a programming cable off eBay (China, two weeks) and already have the software. I was wondering if this is some obvious program problem that folks have seen before.

Cheers,
Dave
 

dkabal

Member
Premium Subscriber
Joined
Jan 14, 2012
Messages
8
Location
Boulder, CO
Call Tom with Red Dog Radios.

Tom already replied back, indicating I should get in touch with whoever sold my company these radios for support. That's a little outside my scope (I work for a large company), I just wanted to hook up these darn speaker microphones....

Cheers,
Dave
 

RodStrong

Member
Joined
Nov 11, 2007
Messages
1,173
Location
West
Tom already replied back, indicating I should get in touch with whoever sold my company these radios for support. That's a little outside my scope (I work for a large company), I just wanted to hook up these darn speaker microphones....

Cheers,
Dave

Interesting. I would like to PM you with questions, but I don't think you have had enough posts to allow the PM function. Not sure how many you are supposed to have. I would imagine just a hand full more at best.

I have a few 454's that I take care of, although I do not consider myself well versed in programming that particular radio. II can try to help you too if you don't have luck with the other member who offered to look at the program once your cable arrives. So PM me if you still need help.
 

dkabal

Member
Premium Subscriber
Joined
Jan 14, 2012
Messages
8
Location
Boulder, CO
I have a few 454's that I take care of, although I do not consider myself well versed in programming that particular radio. II can try to help you too if you don't have luck with the other member who offered to look at the program once your cable arrives. So PM me if you still need help.

Yup, still not PM-qualified.

Thanks! If it's kosher to give out an e-mail, my address is David at Kabal dot org.

Thanks for your help!

Cheers,
Dave
 

RodStrong

Member
Joined
Nov 11, 2007
Messages
1,173
Location
West
Yup, still not PM-qualified.

Thanks! If it's kosher to give out an e-mail, my address is David at Kabal dot org.

Thanks for your help!

Cheers,
Dave

5 must be the magic number because I see I can PM you now. I'll fire one off to you some time tonight.
 

dkabal

Member
Premium Subscriber
Joined
Jan 14, 2012
Messages
8
Location
Boulder, CO
(solution)

So, we got to the bottom of the issue. It's not a programming issue (not the DC supply, not the gain setting), but likely a firmware issue.

The VX-454s we use are equipped with the recording unit (for recording audio post two-tone signalling). This recording unit seems to interfere with the normal functioning of any speaker microphone.

I hope this helps out someone else trying to diagnose such a frustrating radio issue.

We're working with Vertex at a company-level to fix the problem. In the meantime, we've removed these boards to make the radios work with our speaker microphones.

Cheers,
Dave
 

Sharkbait08

Member
Joined
Apr 21, 2013
Messages
33
Location
Kodiak, AK
Does anyone know if this happens with all Vertex speaker mics or just the 45B4B? I have a 454 with the voice recorder, and I'm curious if this problem occurs with all speaker mics.

dkabal, did Vertex ever resolve this so you could use both? If so, what was the resolution?
 

TRNcommLLC

Member
Feed Provider
Joined
May 1, 2010
Messages
84
Location
Monongahela, PA
Does anyone know if this happens with all Vertex speaker mics or just the 45B4B? I have a 454 with the voice recorder, and I'm curious if this problem occurs with all speaker mics.

dkabal, did Vertex ever resolve this so you could use both? If so, what was the resolution?

No,
Make sure you have firmware version 1.17 or higher.
The current is 1.21

I have many in the field with DVS and speaker microphones with no problems.
The old firmware had some bugs.

John
 

Sharkbait08

Member
Joined
Apr 21, 2013
Messages
33
Location
Kodiak, AK
No,
Make sure you have firmware version 1.17 or higher.
The current is 1.21

I have many in the field with DVS and speaker microphones with no problems.
The old firmware had some bugs.

John

Good to know. How do you go about checking the firmware? Is that information available in the programming software? (My cable and software show up on Tuesday) I assume unless I have a firmware writer (which I don't) any updates would have to be through a dealer if I need them?
 

Sharkbait08

Member
Joined
Apr 21, 2013
Messages
33
Location
Kodiak, AK
Good to know. How do you go about checking the firmware? Is that information available in the programming software? (My cable and software show up on Tuesday) I assume unless I have a firmware writer (which I don't) any updates would have to be through a dealer if I need them?

Turns out my radio was good to go. Fully functional remote mic with the dvs installed!
 
Status
Not open for further replies.
Top