• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Program Scanning in F-3061T

Status
Not open for further replies.
K

KE7HIM

Newbie
Joined
Dec 2, 2021
Messages
2
Hello, My first post on the Forum. I'm failing to understand how to program scanning into my 3061t. It is analog, running software ver. 1.7.
Tried following tips from a 2002 post and the limited info in the factory manual. Anyone point me to more detailed/explanatory sources or provide an example file demonstrating different scanning options. I'd like to designate a current channel as priority while scanning others in the same zone. Been using it in SAR and now have greater duties the make scanning more important to me.

thanks
Glen
KE7HIM
 
jeepsandradios

jeepsandradios

Member
Feed Provider
Joined
Jul 29, 2012
Messages
2,065
Location
East of the Mississippi
Scan is simple. Make sure you select the proper scan list in the memory section

1638533429209.png
Then under key and display make sure you select a Scan A or B button. When tuning scan on puish and hold first time to set the scan list. Then it should scan the channels
 
K

KE7HIM

Newbie
Joined
Dec 2, 2021
Messages
2
Thank you! I set a zone as scan list 1 and another as scan list 2 , set P0 as ScanB. set several scan types to check behavior. Now exploring scanning.
73
KE7HIM
 
Status
Not open for further replies.

Similar threads

mwjones
Tier 3 Standard vs. Capacity Max in RRDB
Replies
9
Views
2K
enosjones
enosjones
V
  • Locked
Help me find my perfect portable ham radio
2 3
Replies
50
Views
4K
KevinC
KevinC
Madduck00
Beartracker 885 interest
Replies
8
Views
1K
Madduck00
Madduck00
rjvalenta
all in one with ssb and scan?
Replies
15
Views
2K
merlin
merlin
pb_lonny
Planning a Portable Radio Scanning Session
Replies
3
Views
1K
pb_lonny
pb_lonny
Top