BCD436HP/BCD536HP: Programming Con+ system with duplicate LCN's

[melbournefan]

When I added all of the LCN's into Sentinel, it wouldn't really track all of the channels properly and just skip some conversations with the CON icon flashing.

However, the system is a Con+ system with 30 LCN's but only 15 frequency's.
So on DSD+, I have LCN 1 and 2 on freq A and LCN 3 and 4 on freq B and so on.

Would I have to delete LCN 2 and so on and just leave only one of the frequency's attached to the LCN?
I've only seen programming instructions for only unique LCN's / freqs.

Thanks

 

[jonwienke]

DSD shows logical slot number, not channel. So you divide the slot number by 2 and round up to get channel. LSN 1 or 2 = LCN 1, LSN 3 or 4 is 2, etc. There is only one LCN per frequency.