• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Programming Input Frequencies on BCT15, et al.

Status
Not open for further replies.

Dave_D

Member
Joined
Sep 30, 2005
Messages
162
Hi all,

I've got some hefty trunked systems (e.g., Nevada Shared Radio System - 92 sites) programmed into my BCT15, complete with location data. But now, I want to monitor their input frequencies. Can I do this in a single system program with UASD?

Here's the rub: UASD allows us to assign a separate lat/long for each site in a trunked system -- an elegant design. Conventional systems do not. Is there some clever way I can program the input frequencies into my BCT15 without having to create a separate conventional system program for every location? For example, will EDACS or another trunked system type also scan conventional frequencies if I put 'em in there?

If there's no way to do this, I'm stuck creating 92 separate conventional programs for the various location-specific input frequencies employed by the NSRS. What a mess....

Any help is greatly appreciated.

Dave
 
Status
Not open for further replies.
Top