-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
programming issues with a tk3170
- Thread starter chief3030
- Start date
- Status
- Joined
- Apr 14, 2010
- Messages
- 42
Can you explain what you are trying to do in more detail? What is the effect you want and what do you want it to do for you?
I am trying to set up a channel to page only with a certain frequency. Once the page is received I am trying to get the channel to open up where I can hear the transmission. Once that information is received I need the channel to close the squelch so I don't hear any further traffic from that channel or frequency.
Thanks For any help.
Thanks For any help.
Under your two-tone decode window (1,2,or 3, whichever ones you use) set a time in seconds for the auto reset and then make sure "monitor" is checked. After decode the radio will monitor the channel. When the timer expires, monitor is defeated and goes silent again.
- Status
