Programming LTR System into Pro-106

Status
Not open for further replies.

wirelesscop

Member
Joined
Aug 10, 2003
Messages
175
Hey Everyone,

Any chance someone could advise of a "step-by-step" on how to program an LTR System on the Pro-106?

I am trying to program the Christiana Care system into my radio:

Christiana Care Health Services Trunking System, Various, Delaware - Scanner Frequencies


I am kinda familiar with programming the State of Delaware trunked system into the radio... When I initially set up my radio, I used the programming cable and the computer. That was a while ago and I am a bit rusty. Looking at the way the LTR system is set up, I am a bit corn-fused.

Any help is appreciated.

Thanks!
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
With the Pro-106 you simply select the scan lists you want the LTR associated with 1-20.
PGM -> New -> TGRP -> Select Scan List 1-20
TSYS -> New -> Type LTR
Scroll to Frequencies Enter in all the Frequencies for the trunked system
Scroll down past Expert Below -> Automove HRs: on
Automove will automatically put the frequencies in the proper order for the LTR system.
The scanner will automatically create a wild card group. And when A TGID is found it will be displayed then you can select whether to store or L/O a TGID.
 
Status
Not open for further replies.
Top