whitesox4life
Member
I am needing to program a local IIi system into my scanner but dont know the fleet map. do i need to know this BEFORE programming?
programming motorola IIi system on pro-94
- Thread starter whitesox4life
- Start date
- Status
What system is it? Is it in the radioreference database?
fmon
Silent Key Jan. 14, 2012
This step in programming fleet maps refers:whitesox4life said:
3. Repeatedly press8 or 9 until E1 appears, then press E. A trunked frequency you previously programmed appears.
You can program the frequencies but will need the fleet map data to correctly scan the talkgroups.
If he could tell us his system location, someone may already know what the settings are, or he could just post it in the approprate state forum.
whitesox4life
Member
the systme in which i am referring is the Indiana, State of (Madison County). I have the freqs and tgs but no info on fleet map.
In the database it says set all blocks to sizecode 4. You can use preset #2 in the PRO-94.
Last edited:
edmundl118
Member
- Joined
- Oct 3, 2006
- Messages
- 7
Help!
I need some help. I am trying to program my Pro-94B with Bethlehem PA trunking system. I am able to get the freqs in however I am unable to get the Group IDs in. can anyone help? I have The Scanlite plus program, but when it attamps to put the IDs in I get a "D-err"
I have it set for MOT typd II 800 and the correct freqs so I am all kinds of confused. anyone help me?
thanks
I need some help. I am trying to program my Pro-94B with Bethlehem PA trunking system. I am able to get the freqs in however I am unable to get the Group IDs in. can anyone help? I have The Scanlite plus program, but when it attamps to put the IDs in I get a "D-err"
I have it set for MOT typd II 800 and the correct freqs so I am all kinds of confused. anyone help me?
thanks
One thing to try, make sure you are using the decimal talkgroups and not the hex.
fmon
Silent Key Jan. 14, 2012
Dave's example is in this jpg. Also note the frequencies listed in bank 1 are for site 1 (bank 2 has site 2 but all ID's are in both banks). Insure the check is in the box under Trunk for each trunked frequency and FM is selected under Mode. Leave unchecked under Trunk any conventional freqs listed after the trunked freqs, however, check the correct mode for conventional freqs.DaveIN said:
Last edited:
edmundl118
Member
- Joined
- Oct 3, 2006
- Messages
- 7
loading the Freqs...
I tried that....put FM and such...and still no luck. Its not accepting the IDs
the exact msg I am getting is "D-err No. 054 End"
Chan 54 is black....cause its not useable.
any ideas????
Freq group mode Group ID
852.13750 Bethlehem FM List1 - 1 145
852.58750 Bethlehem FM List1 - 2 976
854.66250 Bethlehem FM List1 - 3 978
854.96250 Bethlehem FM List1 - 4 1040
854.98750 Bethlehem FM List1 - 5 1104
855.96250 Bethlehem FM List1 - 6 1168
I tried that....put FM and such...and still no luck. Its not accepting the IDs
the exact msg I am getting is "D-err No. 054 End"
Chan 54 is black....cause its not useable.
any ideas????
Freq group mode Group ID
852.13750 Bethlehem FM List1 - 1 145
852.58750 Bethlehem FM List1 - 2 976
854.66250 Bethlehem FM List1 - 3 978
854.96250 Bethlehem FM List1 - 4 1040
854.98750 Bethlehem FM List1 - 5 1104
855.96250 Bethlehem FM List1 - 6 1168
Last edited:
fmon
Silent Key Jan. 14, 2012
Because the scanner can only have one active control per bank, each site must be in seperate banks, but you can use the same talkgroups in each bank.edmundl118 said:
whitesox4life
Member
where can i get the software that you have? it would be very handy to have for when i travel out of state. also, how much does it run?
fmon
Silent Key Jan. 14, 2012
http://www.scancat.com/
Click on ScanCat Lite Plus. You can buy and download online or order a CD. Either will work the same. The download can be used quickly.
Note the cable listed for the Radio Shack scanners list the 20-289 cable. This has been replaced by a USB cable 20-047. But some stores may still have the 20-289 available and it may be at discontinued price of 9 bucks. However, some laptops may have a problem with 20-289 (mine does not).
Click on ScanCat Lite Plus. You can buy and download online or order a CD. Either will work the same. The download can be used quickly.
Note the cable listed for the Radio Shack scanners list the 20-289 cable. This has been replaced by a USB cable 20-047. But some stores may still have the 20-289 available and it may be at discontinued price of 9 bucks. However, some laptops may have a problem with 20-289 (mine does not).
edmundl118
Member
- Joined
- Oct 3, 2006
- Messages
- 7
okay..I have tried that...but I am confused on a thing or two. It has a spot for Moto CTRL chan plan, any idea what that would be for? Any idea bout the Fleet map settings? or where I could get the information from?
and the FM thing is still not letting me do it. I am still getting the same error. D-err
Does anyone else have a pro-94B, any of u willing to tryt his out for me...as I try it on my side.
its for Bethlehem, PA trunking freqs.
My error msg: "D-err No. 054 End"
and the FM thing is still not letting me do it. I am still getting the same error. D-err
Does anyone else have a pro-94B, any of u willing to tryt his out for me...as I try it on my side.
its for Bethlehem, PA trunking freqs.
My error msg: "D-err No. 054 End"
Last edited:
fmon
Silent Key Jan. 14, 2012
Some scanners use or can be set to find the voice frequencies via the CC. The 94 requires that all freqs be entered. And each site must be programmed in separate banks. You can however, program all or any part of the ID's in each bank.
Fleet maps are for Motorola Type I or IIi (hybrid) systems. Bethlehem is Type II and the setting on the right of my example (Mot Type II 800) is all that is needed. This actually sets all 8 blocks in the Fleet map to size code 0, which is actually the Type II setting.
This from your previous:
The ID number 145 is incorrect (should be 144) and possibly ID 1008 is what should be in place of 978, also incorrect. The rule is each of these ID's should be divisible by 16 to a whole number. I think the first ID (145) may be causing the rejection of all in the transfer.
edmundl118
Member
- Joined
- Oct 3, 2006
- Messages
- 7
Programing
I gave those IDs as an example...
I am getting the same error with ANY IDs I am entering with the Scanlite. When I attempt to type in the Ids myself directly into the scanner, It will not allow me to enter the IDs. this is the steps I am doing
1) scan and deselect all the chans. I am not work. I have them set in Blocks 9 & 10 so, 1 thru 8 are inactive
2) Manual
3) Enter the IDs (1744)
4) E
....Pressing "E" brings me to the menus that lets me scan WX, HAM, MRN, AIR & POL w/ it scanning freqs.
.....and this is where I am stuck.
Above HAM, there is a lil black sqare blinking with a Num 1 blinkin with the square.
....What in those steps am I doing wrong?
Id # 1744 Lehigh University Police Ch.1
id # 1840 Lehigh University Police Ch.2
These two I really want in only, any other ones I can manage to get in would be a umm a plus.
I gave those IDs as an example...
I am getting the same error with ANY IDs I am entering with the Scanlite. When I attempt to type in the Ids myself directly into the scanner, It will not allow me to enter the IDs. this is the steps I am doing
1) scan and deselect all the chans. I am not work. I have them set in Blocks 9 & 10 so, 1 thru 8 are inactive
2) Manual
3) Enter the IDs (1744)
4) E
....Pressing "E" brings me to the menus that lets me scan WX, HAM, MRN, AIR & POL w/ it scanning freqs.
.....and this is where I am stuck.
Above HAM, there is a lil black sqare blinking with a Num 1 blinkin with the square.
....What in those steps am I doing wrong?
Id # 1744 Lehigh University Police Ch.1
id # 1840 Lehigh University Police Ch.2
These two I really want in only, any other ones I can manage to get in would be a umm a plus.
- Status
