• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

programming mtx 800mhz radio

Status
Not open for further replies.
rad88

rad88

Member
Joined
Sep 14, 2004
Messages
0
Reaction score
0
Location
PA
i am trying to program a gtx mobile 800mhz but how in the world do you enter the system id and the id`s of the areas you want ,also the connector in the back the 16 pin plug has one wire only is there another wire to turn sound on for the built in speaker ?

has rss for radio . and programmer .
 
M

Mozilla

Member
Joined
Nov 19, 2001
Messages
361
Reaction score
0
Location
South Florida
Setting up radio

First off, if you are having to ask these questions you have no business programming the radio, Now if you are an authorized user of the system go see the system administrator or SMR authorized programmer for help. This way the proper values and setting can be checked so you have a properly tuned and configured radio. If you just want to listen ...then buy a scanner..... The scan lists are larger, they have alpha tags in most, the software is free or cheap and you won't be viloating copyright, intellectual and criminal laws. Don't take this personally its just good and friendly advice ...for anyone who is considering this path to monitor their local systems. 8)
 
Status
Not open for further replies.

Similar threads

N9JIG
  • Article
Scanner Tales 126: Favorite Scanners: The BC760XLT
Replies
5
Views
484
pb_lonny
pb_lonny
pb_lonny
BCD436HP/BCD536HP: X36Editor - Web-based configuration editor for Uniden X36-series scanners
Replies
6
Views
760
pb_lonny
pb_lonny
N9JIG
  • Article
Scanner Tales 127: Scanner Favorites: The BCT15 and 15X
Replies
2
Views
414
RobDLG
RobDLG
N9JIG
Scanner Tales 121: Piped, Patched and Painted: N9JIG for September 2026
Replies
5
Views
2K
Kb3uaf
K
S
G5 so far
2
Replies
26
Views
3K
surfacemount
S
Top