Programming Question - I've googled and looked in manuals :-(

Status
Not open for further replies.

Kapelmanj

Member
Premium Subscriber
Joined
Jun 16, 2008
Messages
2
Last edited:

JoeyC

Senior Member
Joined
Dec 19, 2002
Messages
3,506
Location
San Diego, CA
You only really need to put the frequency. You can label it with Name if you wish.
Make sure L/Out is off unless you don't want it scanned.

FCC data will never show a CTCSS/DCS tone, and you don't need it but can be useful if there are several stations on the same frequency.

You won't need Tone L/Out. Make sure ATT is off (unless you are getting intermod on the freq)
Cant tell you what Alert Level is but you don't need to be concerned with it.
Mode will be FM but if Auto is a choice, thats fine too.
Only set Priority if you want scanning priority on that channel.
Comments - irrelevant to scanner.
 
Status
Not open for further replies.
Top