the chip was already up to day. surprised me.
now, how to i program the scanner?
can i download from RR directly to the TRX-1?
now, how to i program the scanner?
can i download from RR directly to the TRX-1?
Didn’t know I could download from radio reference to the scanner.i thought the chip in the scanner had everything from RR.
You don't have to download the database from Radio Reference or Whistler. Once you have TRX-1 EZ-Scan on your computer, download the appended file and save. Under the File tab, go to Restore Configuration from Archive and open the saved file. That will load LAPD into your software. Connect your scanner to the computer. Under the Scanner/SD Card tab, go to Copy Configuration to Scanner Memory/SD Card. That should load LAPD into your scanner. I have three scan lists in the program:
1. LAPD Dispatch
2. LAPD Talkaround
3. LAPD Bureau Tac
I just found in “Conventional Frequencies” all the frequencies you put in. Thank you so much for your time.7/10/2019
Wednesday
Thanks so much. There is no way I would have figured out how to put those frequencies in that scanner. No way.
So now that I have that done, how do I put more frequencies in the scanner?
Hi:DWELL SETTINGS. I didn't want to start a new thread yet but was wondering where the Dwell settings are in EZ Scan?
Are they the 'Advanced DSP Settings'? If so what settings should I try for improving SIMULCAST on my TRX1?
TIA
Try the Uniden SDS series that was designed for simulcast and has hardware in it to decode it. The whistlers do not and as you're experiencing doesn't work for everyone on simulcast. OR just keep adjusting and you might hit on what settings work well for you or go mad doing so.Hi:
If you remember you accidentally wrote me. So I saw your post on Dwell Settings. I am having a lot of problems with simulcast here in Los Angeles. It's really bad. I'm also monitoring. Trunked System for Glendale and Burbank Pc's. They are close to L.A. Beautiful clear transmission from mobile and dispatch. Can you tell me how I can make my garbled transmissions readable?
Thanks,
Larney Sager
Los Angeles, California
Ezscan is fine,I did find the Dwell setting and starting to experiment now. I think I read that a lower number helps with Simulcast.
I've noticed my DMR systems have a very low setting. I'm still learning and get lost here because there are so many post,
many that are mine. I wish there was a TIP section for system types. I think a major TIP for Simulcast would be to only use
the Control Channels and to use the least amount of sites as possible. The hardest thing I've found and stated many times
is that EZ Scan STINKS.
I've been doing this for about 45 years and still will say that EZ Scan STINKS.
Got my TRX-1 today and per tech support: default scan linsts 1-15X are (BLANK) look below that to see the scan lists you downloaded.
Second I found an ISSUE they seem to be unaware of? Them handshaking their database with RR seems to be (BROKEN) to an extent? Trunk systems that re-banded almost a year ago are (NOT) reflected in THERE DATABASE You have to check and HAND FIX FOR NOW TILL THEY FIX THE ISSUE! I bet they lit the guy that wrote Uneasy scan see if he can find the issue?