dictoresno1
Newbie
- Joined
- Apr 3, 2017
- Messages
- 3
Trying to get this radio properly set up. We have one base station/repeater and 250 Motorola HT1250 radios on a 460 mhz channel. I have my agency's frequency plugged in and the radio receives it perfectly fine. RadioReference lists a DPL code of 411, and see another frequency listed under our license as 465 mhz. Is that the transmitter frequency? I have the DPL 411 code manually entered in on the keypad and I had it set it up through Chirp. Now the radio keys up and it sounds like an open mic on my work radio but no sound is transmitted.
So I assume it's triggering the repeater properly but as stated no sound is transmitted. Can someone walk me through the settings either on Chirp or manually on the keypad to get the radio to properly key up the repeater.
Apparently we are getting new radios and going all digital. But our old radios still work with the new base station/repeater. Don't know if this is causing the radio to not transmit.
Sent from my iPhone using Tapatalk
So I assume it's triggering the repeater properly but as stated no sound is transmitted. Can someone walk me through the settings either on Chirp or manually on the keypad to get the radio to properly key up the repeater.
Apparently we are getting new radios and going all digital. But our old radios still work with the new base station/repeater. Don't know if this is causing the radio to not transmit.
Sent from my iPhone using Tapatalk
Last edited: