PSR-310 Help

[SCPD]

Have a questions about the psr-310, Im used to the Uniden dma scanners so any help/answer would be great.

Can you set the hold time on a scan list before it scans the next one like the unidens?

Can you set the LED to be on but not blink or hold from the previous transmission? I have PD (BLUE) FD (RED) and EMS(GREEN) Can the LED just go on with the color when a transmission in on and off when it is off?


Thanks
Mike

 

[W6KRU]

Uniden doesn't have scanlists. They have systems and you set a hold time for a system. The scanner will not move to the next system until the hold time expires. You will not receive TGs from other systems while holding on one.

The GREs do not have systems. They have scanlists that contain lists of TGs. The TGs are associated with TSYSs. You can assign a dwell time to a TSYS. If the scanlists contain TGs that are associated with 2 different TSYSs, you can't receive a TG from a different TSYS while dwelling on the other one. If 2 scanlists contain TGs that are associated with the same TSYS you will receive TGs from both scanlists while monitoring the associated TSYS and there is no need to dwell.

Does that help?

 

[SCPD]

Yes it does. Thank you very much

 

[N1BHH]

You can also extend the dwell time on individual objects, too.