PSR 600 & MARCS

[Volfirefighter]

I am having an issue with my new PSR 600 on MARCS. It refuses to stop on North Canton Fire TG 25136 when scanning. I download the MARCS system from RR in the ARC 500 software and I have TG 25136 in my scanlist. The PSR 600 is getting 3 to 4 bars of signal strength on the control channel and it is connected to an attic mount Scantenna. My BCD996T gets only 1 bar on the control channel connected to the stock antenna and it will stop on North Canton Fire traffic every time.

 

[jerk]

Double-check your TG settings, every now and then sometimes my settings get changed.
Tomorrow I will scan with the pro-106 and see what I get, though the last time I listened I had no reception problems.

I am having an issue with my new PSR 600 on MARCS. It refuses to stop on North Canton Fire TG 25136 when scanning. I download the MARCS system from RR in the ARC 500 software and I have TG 25136 in my scanlist. The PSR 600 is getting 3 to 4 bars of signal strength on the control channel and it is connected to an attic mount Scantenna. My BCD996T gets only 1 bar on the control channel connected to the stock antenna and it will stop on North Canton Fire traffic every time.

 

[jerk]

I hand programmed the group in my scanner... but have not heard anything... though not sure there has been anything to hear. I know in the past it came it ok with a wildcard scan.