PSR 800 Conventional Radio ID's

Status
Not open for further replies.

Kel

Member
Joined
Dec 19, 2002
Messages
320
Location
Southwest Florida
Go to your Trunked Radio system tab,select your scan list,make sure the type is selected to P-25,it should show you the site down below on the screen,press it and you should have options of site,talkgroups,radio ID's.
 

rbrtklamp2

Member
Premium Subscriber
Joined
Dec 8, 2005
Messages
847
Location
Dupage County, Illinois
That sounds about right for trunking systems but that about conventional? There doesn't appear to be any location in the software to add text to conventional Radio IDs. Are you saying to put the conventional radio IDs in with the trunk system radio id's and just to set the scan list to where ever your conventional p25 channels are?

Thanks for clearing this up,
Bob
 

DonS

Member
Joined
Jun 17, 2003
Messages
4,102
Location
Franktown, CO
The PSR-800 won't map RadioIDs received on a conventional P25 frequency to alpha tags. It will only show you the numeric RadioID.
 

shepsvettes

Member
Joined
Dec 6, 2004
Messages
50
Location
Wichita
Radio id-s

With the line 5 set to show radio id-s take the id number from there and add it to the colum in the ezscan software listed as radio id details. Then you can name it and it will show along with the talk groupe.
 

scannerfreak

Moderator
Database Admin
Joined
Jul 3, 2003
Messages
5,193
Location
Indiana
That's for trunked radio systems. As stated above, there is no way to do that with P25 conventional RID's.
 

tim369xxx

Member
Joined
Mar 11, 2010
Messages
14
Location
Pittsburgh, PA
Would be nice if GRE added that feature in a firmware upgrade. Im from Pittsburgh, PA & theres not much P25. except Westmoreland County's Trunked System, Pittsburgh School Police, & Columbia Gas but i would like to have RIDs as much as possible. So far I have 1,645 Radio ID's for Westmoreland & Fayette Counties. lol
 
Status
Not open for further replies.
Top