• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

PTT Release Tone

Status
Not open for further replies.

ambdrvr

Member
Premium Subscriber
Joined
Aug 14, 2005
Messages
97
Release tone

Hello,

The answer is no, the PTT release tone is a radio wide feature. So if you check the box for the PTT release tone it will be present of all channels.

Ambdrvr
 

N2ZPY

Member
Feed Provider
Joined
May 4, 2009
Messages
45
Location
Delaware County NY
What I do on mine is just set one DTMF tone as the end of transmission. This way you get a simple beep when you unkey the mic. This should be able to be set on each channel. I know it can be on the old TK272.

Kevin
 

ramal121

Lots and lots of watts
Premium Subscriber
Joined
Dec 5, 2008
Messages
2,105
Location
Calif Whine Country
What I do on mine is just set one DTMF tone as the end of transmission. This way you get a simple beep when you unkey the mic. This should be able to be set on each channel. I know it can be on the old TK272.

Kevin

Is this what you're trying to do? If so:

First, go to EDIT>OPTIONAL FEATURES>COMMON PAGE 3. Under PTT ID, set PTT ID TYPE as DTMF, then put a single digit in END OF TRANSMISSION.

Second, go to zone(s) and channels(s) you want to enable this for. Click CHANNEL EDIT and then set PTT ID as EOT (end of transmission).

You should be golden.
 

SCES

Member
Joined
Jan 23, 2013
Messages
26
Is this what you're trying to do? If so:

First, go to EDIT>OPTIONAL FEATURES>COMMON PAGE 3. Under PTT ID, set PTT ID TYPE as DTMF, then put a single digit in END OF TRANSMISSION.

Second, go to zone(s) and channels(s) you want to enable this for. Click CHANNEL EDIT and then set PTT ID as EOT (end of transmission).

You should be golden.

I tried that, but it didnt seem to work
 
Status
Not open for further replies.
Top