• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Quantar epic control board.

Status
Not open for further replies.

P25Radio

Member
Premium Subscriber
Joined
Feb 6, 2006
Messages
589
Reaction score
79
Location
Oceanside Ca.
Last week my quantar control board took a turn for the worse and failed. I purchased one from E and it has been working just fine since Saturday. Problem is the card is very warm to the point were it is a concern, I do not remember the other card getting warm to where the replacement card is at this point. I looked in the software and all the voltages look good on the monitor screens, I have no idea of what is going on. This is a VHF R2 machine and working great except a very very warm epic control card.
 

P25Radio

Member
Premium Subscriber
Joined
Feb 6, 2006
Messages
589
Reaction score
79
Location
Oceanside Ca.
Did some more investigation and found I have a IR or intelligent repeater card in a non intelligent machine. Correct replacement card is on the way. Not so intelligent Ha Ha.
 
Status
Not open for further replies.
Top