New posts

To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

QUANTAR SAM, How Many ID'S in the SAM board????

Thread starter FireMarshalRob
Start date Jul 5, 2005

Status: Not open for further replies.

FireMarshalRob

Member

Jul 5, 2005

Hello all,

The boys over at batlabs havn't got the answer to this one, and niether does mother Moto to this point.

In a quantar set up with a MDC SAM board "station access module" when loaded with the default RAC file within mode 00 allows for 11 PTT mdc id's to be entered.

All 11 PTT ID's work, and will qualify TX of the repeater. No ID, ID not in list, no access to the repeater.

HOWEVER...

When you add an additional mode corresponding to action table 01 "repeater access action table" those ID's don't work. Tried even changing the 3 action table, no luck. The original 11 in mode 00 work, but any additional modes with ID's don't work.

We need to add more than 11 ID's. Something in the area of 50 MDC PTT id's.

Please, Any one that can provide help on this would be great. If you know some one at MOTO that is knowledgable with the SAM, pleas pass the name and number.

Thanks, Rob