Hi all, I'm new to the forum but not new to scanning. I havent used a scanner since the rebanding process began as I didnt have a radio that would work with the rebanding, but I just picked up a Pro-106, installed and purchased the ARC500 software and succesfully updated the radio to the latest firmware. I believe I am doing OK using the software and I have been importing frequencies and such from the database here. I have been trying to scan the Suffolk County PD in NY (trunked rebanded system) and when its all said and done, I only seem to be picking up a small portion of the transmissions. Even stranger is that the scanner seems to be stopping on the programmed talkgroups at times when there should be a transmission but Im not getting anything. Then I wil get a random transmission crystal clear. I am confirming the transmissions are happening while listening to an online broadcast of the same transmissions, but Im not getting most of it on my radio. Squelch settings dont seem to make a difference, even unsquelched and paused on a talkgroup that I am sure is transmitting, I get nothing. But then I will get a random transmission clear as day. What I dont really know is if what I am importing from the database and uploading to the scanner is the actual rebanded frequencies. Making this more complicated is seeing the "rebanding calculator" in the software. Am I supposed to be applying the rebanding calculator prior to uploading to the scanner? Ive searched around, but between rebanding and the learning curve between this radio and what I was used to previously, I am quite lost. When I import the data from the dadabase, it reads "Suffolk County Channels : 22 / Rebanded GPS : 40.82111 / -72.91833". Does that mean they are already rebanded?