Question about the PSR-300 and the squelch.

Status
Not open for further replies.

Smerri

Member
Joined
Sep 3, 2007
Messages
233
Location
Massachusetts
Normally, when I turned the squelch all the way to the left (the off position for the volume) I would hear nothing but static, and had to tune accordingly so the static would disappear. This would happen when I had all frequencies programmed in as FM.

I recently learned that PL tones should be programmed in as CT and DPL tones as DC. Moving from FM to CT/DC, did this cause my squelch to not turn channels to static, or did I screw something up and need to go for a reset of the scanner?
 

n2mdk

Member
Joined
Jul 27, 2007
Messages
2,441
Location
Ames, IA
Yes on conventional channels if the code squelch is turned on you won't hear the static.
 
Status
Not open for further replies.
Top