I am VERY familiar with this system. Walton County is the primary site to the OARS system. Members of Walton County Fire, SO, EMS, MPD/Fire, Loganville PD/Fire, Social Circle PD/Fire all use APX4500s, APX 6000s M1s with some M2s around. Public Works for the cities and county uses XTS2500s (currently in upgrade). All public safety channels are Phase 2 but do revert to Phase 1 ocassionally due to some random portables in the wild that are still XTSs. The EMS to hospital channel is Phase 1. All public works channels are Phase 1. Walton County do not have Oconee or Green County coverage per frequency. Also “roaming” is not programmed in any Walton County Radio. They are linked via talkgroups. The “OARS” talkgroups are unencrypted however very rarely used. 8Call/Tac and 7Call/Tac are more used. All Walton County and cities public safety channels are strapped with encryption and public works are unencrypted. Loganville units have Gwinnett programmed in their radios so they can get on the Gwinnett system. Social Circle has access to Newton via a Newton portable are the fire stations (Newton is Harris OpenSky). GSP has Walton Radios with them. If you want to monitor Walton you are out of luck. It will more than likely never be unencrypted again. You can hear Walton on VHF *sometimes* but don’t hold your breath. You can hear Walton if you monitor the local Airlife 6 and 2 freqs and AE117 on HEARS and State Fire VHF. Dispatch Patches the VHF to a Tac channel for EMS to make contact. I hope this answered your question.