Kenwood: Question - Kenwood TM-D710GA APRS PATH DISPLAY

Status
Not open for further replies.

dapaq2

Member
Joined
Oct 10, 2005
Messages
274
Location
Northwest Indiana
Group,

On my Kenwood TM-D710GA, there is a function that occurs on the display that shows "VIA the a first and last call sign and some other information". Almost every time my radio beacons I get this on the display showing me the routing of my beacon to an iGate.

I am not sure how I managed to enable this, I sure don't remember it doing this before, but I don't want it and have been trying to figure out for a couple weeks now how to turn it off.

Does anyone know where or how to disable this? Please see attached screen shot image.

Thank you,
Doug
 

Attachments

AK9R

Lead Wiki Manager
Super Moderator
Joined
Jul 18, 2004
Messages
6,422
Location
Central Indiana
This is controlled by the settings of Menu 625 Display Area. See page APRS-19 and APRS-3 in the CD-ROM manual.
 
Last edited:

dapaq2

Member
Joined
Oct 10, 2005
Messages
274
Location
Northwest Indiana
Well that's very deceiving... Argh!

I was under the impression that "Display Area" meant just that, (location/position on the screen the information is displayed, such as full screen, one side of the screen, or disabled), I was not thinking that it meant WHAT INFORMATION OR CONTENT is displayed on the screen. They should rename it to "Displayed Information or Displayed Content" instead of Display Area.

Ok, I will run down to the car in a little bit and adjust the settings... Thank you W9BU for this helpful information.

Doug
 
Status
Not open for further replies.
Top