Question on trunking

Status
Not open for further replies.

edd55

Member
Joined
Apr 11, 2008
Messages
5
Location
Peterborough
I have a PSR-600 scanner, finally figured out how to program in some Motorola stuff, but I got stumped on this one, trying to program in Cobourg, from the RR there is a little box at the top of the data sheet that is different says SYSTEM ID and CONNECT TONE ( 5927 & 128.57 ) where do I put this in or do I use it..?
I am using ScanControl software..
 

VE3JSO

Member
Joined
Mar 3, 2007
Messages
988
Location
sarnia ont
I have a PSR-600 scanner, finally figured out how to program in some Motorola stuff, but I got stumped on this one, trying to program in Cobourg, from the RR there is a little box at the top of the data sheet that is different says SYSTEM ID and CONNECT TONE ( 5927 & 128.57 ) where do I put this in or do I use it..?
I am using ScanControl software..

i don't think you need to program it in i did not have to when programed pro 106 for fleetnet and another motorola system in my area all that you need to program the psr 600 is the control channel and the talk groups and for fleetnet which colbourg police service is going on you will need the T-tables and you are ready to go
 
Last edited:
Status
Not open for further replies.
Top