New posts

To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Question - Remote Control Devices

Thread starter dapaq2
Start date Dec 23, 2011

Status: Not open for further replies.

dapaq2

Member

Dec 23, 2011

A project I am looking at working on and I wanted to ask you guys. I am looking to see what all is out there for DTMF Remote Control Devices that have Voice Confirmation built into them. Also anyone know of any that have a vhf or uhf tranceiver built into them? Also any that offer ctcss or dcs subaudible signaling. Looking for ideas on remote control dtmf or other signalling format device that controls relays for controlling lighting, motors, sirens, and other electrical items remotely over two way radio. My application would be more on the commercial side than an ametour radio application, feel free to share those commerical application products.

Thanks,

Doug