Questions on how to program certain PD systems...im lost

[CapitalPunishment]

Hey folks,

Coming this friday im going to be going away for a week and a half to Sevier County, Tennessee and after that, Transylvania County in North Carolina. I would like to be able to listen to the police while im there.

Sevier County frequencies:
http://www.radioreference.com/modules.php?name=RR&ctid=2505

Transylvania County frequencies:
http://www.radioreference.com/modules.php?name=RR&ctid=1974

How the heck do i program these into my Uniden 250D Digital? :?

Im used to programming talkgroups and whatnot. How do i do these?

 

[mciupa]

Enter them conventionally and not in TRUNK mode.

Have a good trip !

 

[fmon]

Software would be the best source for programming the scanner, but you only have a couple of days left.

Hear goes. And PM me with your phone number if you get desperate.

A look at each of the Sevier Co TN sites, indicate there is insufficient data for programming talkgroups (TG’S) except for possibly the Metro Dupont Mot hybrid system. Each of the three Motorola systems will need to be in separate banks and setup as outlined in this
BC250D programming shortcut. The single LTR Dollywood system will need to be in a bank by itself also and needs to be setup with the frequencies as listed on your webpage in Logical Channel Number (LCN) 01 through 09.

The multi site LTR system will need to have a separate bank for each of the sites you choose to use. Seivierville and Oliver Springs will be tricky, the rest should be easy.

If all systems listed on your page are programmed and setup correctly, you would need three banks for Mot and 7 banks for LTR. So all ten banks for the scanner would be committed. However, you can scan conventional frequencies in banks with trunk systems so there is plenty of frequency space for the Green frequencies on the opening page for Sevier Co and the green frequencies on the Transylvania Co NC page also.