BOBRR
Member
Hello,
Using Sentinel with a 436.
Realize I’ve written about some of this before, but I’m really having a rough
time understanding this to the extent I’d like to.
It’s all coming together, I think, but slowly. “Old” age problem.
Lots to learn.
If someone could explain the following for me, would be most appreciative.
Let’s say I have created 10 FAV.
And have given each one a different QK (in Sentinel)
All set so far.
It’s the “Chart(s)” that show up that I don’t fully understand.
a. I go to the overall heading “Favorites Lists” in the left hand pane.
All the QK’s I’ve assigned show up
I then go to “Edit Profile,” and “Quick Keys Status”
My understanding is that if I e.g. check the boxes for QK 1, 2, and 3, that
QK’s 1, 2, and 3 would then be activated, automatically, after downloading to the radio.
And scanning of these three lists would begin without my intervention.
I would not have to press the 1,2, or 3 QK in the radio for me to have these three FAV lists scanned.
*So, this Chart is used to Only to activate automatically which QK are turned On
when the 436 is initially turned on.
No other purpose.
*Even if a box for a QK is UN-Checked here, once using the radio,
pressing that QK number will bring up the FAV. True ?
All of the above true ?
b. I now go to “Edit Favorites List...”
I select a particular FAV.
Under the tab: “System Quick Keys Status”, a similar Chart to the previous one shows up.
*How is it “different” from the one in the Edit Profiles ?
*How is this chart used ?
*How should it be configured ?
Thanks again for all the help, Truly appreciated,
Bob
Using Sentinel with a 436.
Realize I’ve written about some of this before, but I’m really having a rough
time understanding this to the extent I’d like to.
It’s all coming together, I think, but slowly. “Old” age problem.
Lots to learn.
If someone could explain the following for me, would be most appreciative.
Let’s say I have created 10 FAV.
And have given each one a different QK (in Sentinel)
All set so far.
It’s the “Chart(s)” that show up that I don’t fully understand.
a. I go to the overall heading “Favorites Lists” in the left hand pane.
All the QK’s I’ve assigned show up
I then go to “Edit Profile,” and “Quick Keys Status”
My understanding is that if I e.g. check the boxes for QK 1, 2, and 3, that
QK’s 1, 2, and 3 would then be activated, automatically, after downloading to the radio.
And scanning of these three lists would begin without my intervention.
I would not have to press the 1,2, or 3 QK in the radio for me to have these three FAV lists scanned.
*So, this Chart is used to Only to activate automatically which QK are turned On
when the 436 is initially turned on.
No other purpose.
*Even if a box for a QK is UN-Checked here, once using the radio,
pressing that QK number will bring up the FAV. True ?
All of the above true ?
b. I now go to “Edit Favorites List...”
I select a particular FAV.
Under the tab: “System Quick Keys Status”, a similar Chart to the previous one shows up.
*How is it “different” from the one in the Edit Profiles ?
*How is this chart used ?
*How should it be configured ?
Thanks again for all the help, Truly appreciated,
Bob