Racom control channel

Status
Not open for further replies.

gator

Member
Premium Subscriber
Joined
Nov 13, 2002
Messages
219
Location
Mitchell,SD
Hey Rick I cannnot seem to get the control channel for the Racom in Mitchell to decode,the tower is not far from my place and the signal seems good.I am able to decode the South Dakota state radio system just fine,but for some reason this EDACS system is giving me problems
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
Please post an image of the receiver 'scope window while your PRO2053 is tuned to the RACOM control channel. The waveform may give us a clue.
 

gator

Member
Premium Subscriber
Joined
Nov 13, 2002
Messages
219
Location
Mitchell,SD
I dont get anything on uniscope for edacs
 

Attachments

  • Unitrunker.jpg
    Unitrunker.jpg
    39 KB · Views: 172

gator

Member
Premium Subscriber
Joined
Nov 13, 2002
Messages
219
Location
Mitchell,SD
this a picture of the South Dakota TRS
 

Attachments

  • unitrunker 2.jpg
    unitrunker 2.jpg
    37.7 KB · Views: 191

gator

Member
Premium Subscriber
Joined
Nov 13, 2002
Messages
219
Location
Mitchell,SD
sorry forgot to turn sound level up on Racom screenshot
here is another pic
 

Attachments

  • Unitrunker.jpg
    Unitrunker.jpg
    33.6 KB · Views: 175

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
The signal level is way down. You want the waveform to fill a third to two-thirds of the screen.

Is this speaker / headphone audio or discriminator audio? Did you add the tap yourself?
 

gator

Member
Premium Subscriber
Joined
Nov 13, 2002
Messages
219
Location
Mitchell,SD
so far I could not get anything to work with the line in so I went to the mic and went through and tried every level there still no luck so so I hooked up my creative xfi in and plugged into the mic through that and it come right through.
 
Status
Not open for further replies.
Top