• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Radio Frequency Identification (RFID)

Status
Not open for further replies.

micael

Member
Joined
Jun 19, 2006
Messages
17
Hi,
I'm trying to implement a multiple frequency technique for setting up an ID system.
So i was wondering if it is possible to transmit two frequencies at 433MHz and
915MHz simultaneously using CC1020 transceiver and using the same antenna?
 

micael

Member
Joined
Jun 19, 2006
Messages
17
multiple frequency technique

Indeed...
Is there any way to transmit two different frequencies simultaneously using the same transmitter?
 
Last edited:
Status
Not open for further replies.
Top