Radio Meeting 04-27-2014 1300 To 1500

Status
Not open for further replies.

JASII

Member
Joined
Apr 29, 2006
Messages
2,302
We are now scheduled for the Eagan Davanni's on Sunday, April 27, 2014 from 1300 to 1500.


Eagan Davanni's
1960 Cliff Lake Rd
Eagan, MN 55122
651-688-6111

It is very easy to find. It is in a strip mall just west of I-35E and north of Cliff Road (Dakota County Road 32). We should have a couple of people there with the new Uniden BCD436HP. If any amateur radio operators are interested, we may be able to arrange a talk in frequency.

http://info.uniden.com/NewScanners

https://maps.google.com/maps?q=1960+cliff+lake+rd+eagan+mn&ie=UTF-8&hq=&hnear=0x87f631c5cc8dd89b:0x563dcaea6482b5bb,1960+Cliff+Lake+Rd,+Eagan,+MN+55122&gl=us&ei=soY8U-P1HtaxsASn64CwAw&ved=0CCUQ8gEwAA

http://www.davannis.com/
 
Last edited:

N0FPY

Member
Joined
Dec 15, 2003
Messages
212
Location
Brooklyn Park, MN
Did you come up with a talk in Frequency for 2 meters? I know the last time we met there the GPS units were having issues pin pointing the exact location. Mine told me I arrived about two blocks before the address.
 

JASII

Member
Joined
Apr 29, 2006
Messages
2,302
I put in an email request to see if we an use 146.700 that afternoon. The coordinates, if anybody wants to enter them directly, are as follows:

N44.79362 W93.20539
 

JASII

Member
Joined
Apr 29, 2006
Messages
2,302
It is a go. My understanding is that we can use 146.700 for talk in. Don't forget the PL tone!
 

bearcatrp

Member
Joined
Apr 11, 2005
Messages
516
Location
Central Mn
Sounds good. will bring the 436. Am presuming others will bring scanners so maybe we can do a comparison test or should I bring my 396T?
 

JASII

Member
Joined
Apr 29, 2006
Messages
2,302
The forecast for tomorrow, according to My Fox Twin Cities, is cooler with rain and drizzle Hi 51° Lo 43°. That means it will be a great day to meet fellow hobbyists at the Eagan Davanni's, have a nice lunch, and enjoy discussing the hobby! See you there!
 

JASII

Member
Joined
Apr 29, 2006
Messages
2,302
Thank you to everybody that attended the meeting today. I had a good time visiting with everyone today and learned some new things. I hope we do this again. A special thank you to Bearcatrp for bringing the Uniden BCD436HP to the meeting. It does sound like it was performing pretty well and I may have to spring for one of those.
 
Status
Not open for further replies.
Top