Radio shack 106 "pID" problem

[bigguy49735]

I have a radio shack pro 106. Several frequencies have the following showing up in display and I would like some help to get rid of it. It is showing....pID.
I believe it is a priority setting but I would like to get rid of it.
When a transmission comes on "priority scan" displays and interrupts the transmission.
Can anyone instruct me on how to delete this from the radio.
Thanks!

 

[pathalogical]

You cannot remove that info. It will show up on objects when they are active.

 

[rdale]

If you don't want priority scan to interrupt, then turn priority scan.

 

[DonS]

I have a radio shack pro 106. Several frequencies have the following showing up in display and I would like some help to get rid of it. It is showing....pID.
Can anyone instruct me on how to delete this from the radio.

Those 3 characters at the end of the first line tell you about the object's settings. You cannot get rid of them.

p = object's priority flag off, P = object's priority flag on
l = object not locked out, L = object locked out (blinks if "temporary lockout")
d = object's delay setting turned off, D = object's delay setting turned on

 

[bigguy49735]

pID problem

Thanks for the help!

 

[bigguy49735]

How do I change the delay setting and turn it off?

 

[Astrak]

How do I change the delay setting and turn it off?

PGM+EDIT(F2)+CURR(F2) then scroll down to delay and turn it off then save.