Radio Shack Pro 197

Status
Not open for further replies.

billmankin

Member
Premium Subscriber
Joined
Jan 27, 2010
Messages
7
Location
Quarryville,Penna 17566
Maybe someone can advise me. I'm trying to program a trunked system for Harford County Maryland.
They simulcast the dispatch on 460.600, I recieve the dispatch loud and clear. When I program the trunked system in I enter the control frequency, and then I use the wildcard. The scanner is supposed to monitor all talk groups in that mode. For some reason I do not recieve any transmissions. Like a said I here the dispatch and the dispatcher telling them to us for example talkgroup A4. Then that is where it ends I hear nothing. Would appreciate any help anyone can give me.
 

K2KOH

Member
Premium Subscriber
Joined
Jul 30, 2001
Messages
2,731
Location
Putnam County, NY
The only thing I can think of is make sure Private is not selected. Other than that, I'm stumped. Are you using any software to program?
 

billmankin

Member
Premium Subscriber
Joined
Jan 27, 2010
Messages
7
Location
Quarryville,Penna 17566
AEMTKieran

Thanks for the help, I check and make sure that I do not have "private" selected. I'm using ARC 500 software, but I have also programmed it manually also. Anyway thanks again.
 
Status
Not open for further replies.
Top