Raspberry Pi image file

[bleazenb]

I have tried numinous times to download the raspberry pi image file from broadcastify.com for setting up pi to stream to broadcastify, but the download fails every time before it completes? Anything I’m doing wrong, I’ve downloaded it in the past with no problems.

 

[Kingscup]

I also tried to download it several months ago and couldn’t get it to work either. I would use the link below to manually install Darkice if you cannot get the download to work.

Raspberry Pi Darkice streaming made easy

I have put together an SD card image for a Raspberry Pi which should work "out of the box" to set up a pi for streaming. You will need a Pi3 or earlier. It will not work on a pi4 as it is based on Raspbian Stretch Lite and the 4 requires Buster. Darkice requires pretty minimal CPU resources...

forums.radioreference.com

 

[IcomIcR20]

Are you having issues with the "flash from URL" step? I ended up having to paste the URL (https://www.broadcastify.com/rpi/image) into my browser, download the image to my PC, and then flash from file in BalenaEtcher. I just tested it and was able to download the image from the above URL with no issues.

 

[rf_patriot200]

I have tried numinous times to download the raspberry pi image file from broadcastify.com for setting up pi to stream to broadcastify, but the download fails every time before it completes? Anything I’m doing wrong, I’ve downloaded it in the past with no problems.

You can get the stock raspberry pi image from Balena Etcher or balenaetcher.com

 

[bleazenb]

Are you having issues with the "flash from URL" step? I ended up having to paste the URL (https://www.broadcastify.com/rpi/image) into my browser, download the image to my PC, and then flash from file in BalenaEtcher. I just tested it and was able to download the image from the above URL with no issues.

No, its starts the download and gets anywhere from 20 to 70% complete and if fails. Tried as you suggested and same thing happens? No idea why the download fails.