Norwalk
Rumor has it Norwalk PD is comming up next few months....-15mhz from curr
Rumor has it Norwalk PD is comming up next few months....-15mhz from curr
Re-Banding
- Thread starter Alarmroom
- Start date
- Status
xplorer417
Member
New Rafs 1 And Rafs 2 Rebanding
HI just wondering if the new rafs are in use and if so how long have they been in use for just wondering thanks
857.4125 MHz PL 114.8 RAFS 1
854.9125 MHz PL 114.8 RAFS 2
HI just wondering if the new rafs are in use and if so how long have they been in use for just wondering thanks
857.4125 MHz PL 114.8 RAFS 1
854.9125 MHz PL 114.8 RAFS 2
LedZeppelin
Member
Saw this on one of the Yahoo groups, thought it was interesting.
ITAC Repeater Re: [ConnScan] Bradley International Airport Emergency Services Cr
After rebanding is complete, the ITAC frequencies will be:
851.0125R Calling
851.5125R I-TAC 1
852.0125R I-TAC 2
852.5125R I-TAC 3
853.0125R I-TAC 4
The PL on all of these will be 156.7 Hz. The ITAC frequencies are
definitely worth keeping programmed in the scanner. When they are
active the communications are usually interesting. Rebanding is in
progress in Connecticut, albeit slowly.
--- In ConnScan@yahoogroups.com, "Ken" <rfinder1@...> wrote:
>
> Hello Alec:
>
> The ITAC's are nationwide frequencies. This is what is currently
available
> (but will change in the future due to some rebanding in the 800 mhz
band):
>
> ITAC CALL 866.0125
> ITAC -1 866.5125
> ITAC -2 867.0125
> ITAC -3 867.5125
> ITAC -4 868.0125
>
> Remember that the repeater input is 45 mhz below these outputs.
Also these
> repeater outputs can be used simplex if necessary. I don't know
if this
> tower can be remotely changed to any one of these frequencies or is
set to
> one of the frequencies.
>
> Ken
>
ITAC Repeater Re: [ConnScan] Bradley International Airport Emergency Services Cr
After rebanding is complete, the ITAC frequencies will be:
851.0125R Calling
851.5125R I-TAC 1
852.0125R I-TAC 2
852.5125R I-TAC 3
853.0125R I-TAC 4
The PL on all of these will be 156.7 Hz. The ITAC frequencies are
definitely worth keeping programmed in the scanner. When they are
active the communications are usually interesting. Rebanding is in
progress in Connecticut, albeit slowly.
--- In ConnScan@yahoogroups.com, "Ken" <rfinder1@...> wrote:
>
> Hello Alec:
>
> The ITAC's are nationwide frequencies. This is what is currently
available
> (but will change in the future due to some rebanding in the 800 mhz
band):
>
> ITAC CALL 866.0125
> ITAC -1 866.5125
> ITAC -2 867.0125
> ITAC -3 867.5125
> ITAC -4 868.0125
>
> Remember that the repeater input is 45 mhz below these outputs.
Also these
> repeater outputs can be used simplex if necessary. I don't know
if this
> tower can be remotely changed to any one of these frequencies or is
set to
> one of the frequencies.
>
> Ken
>
xplorer417
Member
Hartford 800 New Rafs 2 And Uhf Rafs 2
I been montioring the uhf rafs and seems like there is some interference on the 800 RAFS 854 9125 just wondering if anyone else is geten this to it is once in a while key up and stays open for quit a while and nothing else then shuts off then keys the repeater up again i was monitoring it saturday night around 19:05 hours it has done this seems like since new rafs has been in place.
I been montioring the uhf rafs and seems like there is some interference on the 800 RAFS 854 9125 just wondering if anyone else is geten this to it is once in a while key up and stays open for quit a while and nothing else then shuts off then keys the repeater up again i was monitoring it saturday night around 19:05 hours it has done this seems like since new rafs has been in place.
Full New Haven FD Freqs?
Can someone verify for me the following information is the NEW FULL set of NHFD freqs? I am not sure the two posted on this thread are rptr outputs for disp/ops? Is this the full set w/ Fireground and inputs?
If not, could someone provide me the full list w/ rptr splits?
Disp:851.3125 out 806.3125 in
Ops: 851.0125 out 806.0126 in
Fireground: 854.4875
Fireground: 859.5625
If these are incorrect (which they may be) could someone provide the correct ones or put a link as to where I can find them?
I got these from the database on this site, has it been updated? Thanks.
From FCC site this may be an option as well?
Rptr: 854.4875out/809.4875 in
Rptr: 859.5625out/814.56255 in
Thanks for the help!
Can someone verify for me the following information is the NEW FULL set of NHFD freqs? I am not sure the two posted on this thread are rptr outputs for disp/ops? Is this the full set w/ Fireground and inputs?
If not, could someone provide me the full list w/ rptr splits?
Disp:851.3125 out 806.3125 in
Ops: 851.0125 out 806.0126 in
Fireground: 854.4875
Fireground: 859.5625
If these are incorrect (which they may be) could someone provide the correct ones or put a link as to where I can find them?
I got these from the database on this site, has it been updated? Thanks.
From FCC site this may be an option as well?
Rptr: 854.4875out/809.4875 in
Rptr: 859.5625out/814.56255 in
Thanks for the help!
Last edited:
wesct
Member
Heres the current info:
wesct said:
xplorer417
Member
800 rafs 2 link with 460.1750
HI all can anyone tell me why sometimes on uhf rafs 2 link with 800 if i am listening to either one they transmit and nothing then stay on for a while then goes away then comes back again just wondering why the old rafs never did that there is also no morse code either when i hear it transmit
HI all can anyone tell me why sometimes on uhf rafs 2 link with 800 if i am listening to either one they transmit and nothing then stay on for a while then goes away then comes back again just wondering why the old rafs never did that there is also no morse code either when i hear it transmit
This was in the Greenwich Times on May 21st.
http://www.greenwichtime.com/news/local/scn-gt-a1radiomondaymay21,0,5021331.story
Looks like they are going to start rebanding!
Dave
http://www.greenwichtime.com/news/local/scn-gt-a1radiomondaymay21,0,5021331.story
Looks like they are going to start rebanding!
Dave
xplorer417
Member
New Rafs Working
Hi All Just Wondering If The New Raf Freqs Are Working I Hear Trooper One And New Britian On Htfd Intercity Talken To Them About Looking For Someone Just Wondering Why They Would Of Gone To Intercity Not Rafs
Hi All Just Wondering If The New Raf Freqs Are Working I Hear Trooper One And New Britian On Htfd Intercity Talken To Them About Looking For Someone Just Wondering Why They Would Of Gone To Intercity Not Rafs
scannerrail
Member
Dave520 said:
That link is dead
Looks like the newspaper "archived" the article. Here is a link that gives you a summary of the article but not the full text. If you want the full version, you would have to buy it from the newspaper.
Sorry,
Dave
http://pqasb.pqarchiver.com/greenwi...1&desc=Emergency+radio+service+to+get+upgrade
Sorry,
Dave
http://pqasb.pqarchiver.com/greenwi...1&desc=Emergency+radio+service+to+get+upgrade
wesct
Member
As of August 7, 2007
Hartford County
Hartford Hospital Security 860.8125 MHz DPL025
CCSU Police, New Britain: 856.8125 MHz DPL071
857.4125 MHz PL 114.8 RAFS 1 now in use
854.9125 MHz PL 114.8 RAFS 2 now in use
Windham County
Willimantic PD 854.2625 Mhz PL 162.2
New Haven County
Meriden PD 855.5125 MHz PL123.0
New Haven Fire :
854.4875 MHz DPL311
859.5625 MHz DPL311
Sprague: 855.2625 MHz --license in effect 7-24-2006
Statewide:
Department of Corrections
854.1125 MHz; 857.6625 MHz; 859.5375 Mhz; and 859.6625 MHz- status pending
Update on the State Police:
I have heard from a reliable source that the changeover
will occur on August 25,2007.
Thanks to everyone for the updates
wesct
Hartford County
Hartford Hospital Security 860.8125 MHz DPL025
CCSU Police, New Britain: 856.8125 MHz DPL071
857.4125 MHz PL 114.8 RAFS 1 now in use
854.9125 MHz PL 114.8 RAFS 2 now in use
Windham County
Willimantic PD 854.2625 Mhz PL 162.2
New Haven County
Meriden PD 855.5125 MHz PL123.0
New Haven Fire :
854.4875 MHz DPL311
859.5625 MHz DPL311
Sprague: 855.2625 MHz --license in effect 7-24-2006
Statewide:
Department of Corrections
854.1125 MHz; 857.6625 MHz; 859.5375 Mhz; and 859.6625 MHz- status pending
Update on the State Police:
I have heard from a reliable source that the changeover
will occur on August 25,2007.
Thanks to everyone for the updates
wesct
Last edited:
Tom_G
Member
???
What are the changes for the State Police ?
What are the changes for the State Police ?
wesct
Member
Tom_G said:
Its funny you ask- I have done a little research and so far no
frequency changes yet.
The frequencys above 866 will go down 15 mhz, but I am
not sure what else will change. Maybe Alarmroom can shed some
light on this
wesct
Tom_G
Member
I am hoping its August of 2008 .....:wink:
I wanna breathe some more life out of my PRO-96......
We'll see what happens... Thanks,
I wanna breathe some more life out of my PRO-96......
We'll see what happens... Thanks,
Unsure if the rebanding will take place this soon or just some significant modifications to the System, Zones and Talkgroups. A basic overview was all I had heard.
The State will be covered by two Systems instead of one. New zones will spread traffic out from overloaded zones. Talkgroup names and functions will change (but not many of the actual TG IDs). (social engineering with a Moto tech
Waiting ....
chris
The State will be covered by two Systems instead of one. New zones will spread traffic out from overloaded zones. Talkgroup names and functions will change (but not many of the actual TG IDs). (social engineering with a Moto tech
Waiting ....
chris
wesct
Member
cg said:Unsure if the rebanding will take place this soon or just some significant modifications to the System, Zones and Talkgroups. A basic overview was all I had heard.
The State will be covered by two Systems instead of one. New zones will spread traffic out from overloaded zones. Talkgroup names and functions will change (but not many of the actual TG IDs). (social engineering with a Moto tech
Waiting ....
chris
I was told about 2 weeks ago that it was going to happen maybe in December,
so I am trying to find out the real scoop. The source was from Troop K
so maybe east of the river is first?
wesct
Will the new UNIDEN BCT396D be able to monitor the CSP AFTER re-banding takes affect.
wesct
Member
EFjohnsonVHF said:
Please see this thread:
http://www.radioreference.com/forums/showthread.php?t=12078
wesct
- Status