Re Pro 2096 locking out talk groups

[diggeropaddy]

Can anybody how to lock out a talk group on a RS pro 2096.

Thanks

 

[diggeropaddy]

Locking Out Unwanted Talk Groups

Does anyone know hoe to lock out unwanted talk groups on a radio shack pro2096?

 

[N0WEF]

It's been awhile, but don't you just select the TGID and hit L/OUT?

 

[diggeropaddy]

How do you select the TGID

 

[N0WEF]

Well the easiest way would be just wait till the TGID becomes active, and just hit L/OUT

Or, you can hit MANUAL, then use the arrows to scroll through.

 

[ka3jjz]

Actually the best way is to build the scan lists for only those talkgroups you want to hear. If memory serves, that means running in closed mode (which is similar, if I understand it properly, to Uniden's ID Scan mode). In open mode (similar to Uniden's ID Search mode) you'll hear every talkgroup regardless of whether you want it or not.

The problem with running in open mode is that at some point you're going to hit the limit of how many tgs you can lock. Best to build something to the way you want to hear it

best regards..Mike

 

[ka3jjz]

Like I mentioned in another thread, if you do this, eventually you're going to hit the limit of how many tgs can be locked out. Far better to create scan lists and run in closed mode...are you programming by hand or with software? If you're using Win96 or ARC96, no doubt someone here can help..

best regards..Mike

 

[N0WEF]

Did I miss where he brought up being in "Open Mode"?

 

[Swipesy]

Can anybody how to lock out a talk group on a RS pro 2096.

Thanks

Look at page 53 of the Pro 2096 manual. If you don't have the manual it is readily available on the Internet.

 

[RoninJoliet]

By hand press "Man" "PGM","TRUNK" in the bank you have the trunk system, scroll thru the TG's and L/O or delete the ones you don't want...You can press F+5 and use the closed mode, then while the trunk system is active press F+Trunk and you can see the "sub-banks with the TG's and press the #bank and lock it out....Those are banks 0-5.....