Just bought a used Pro-2021 and I am having trouble finding a connector to fit into the base antenna slot on the rear. I have an antenna lead with a BNC connector, I'm just not sure what connector goes in the scanner. I tried a BNC to RCA, but that one is too short. Anyone know?
Realistic Pro-2021 Antenna connector
- Thread starter BakeryBoy
- Start date
-
- Tags
- antenna coax connectors pro-2021
- Status
wtp
Member
its old!
try motorola connector
also was the old a.m. car radio connector, you could try one if you have one!
try motorola connector
also was the old a.m. car radio connector, you could try one if you have one!
russellmaher
KC1ANC
I would also go with the Motorola connector for the 2021 scanner. If the "ant" location on the back is an open hole then that's what the antenna will use for mounting.
You can try Radio Shack for it, if you have a store in your area.
Russell
You can try Radio Shack for it, if you have a store in your area.
Russell
bama9999
Member
Since you have a bnc coax connector, this is what you'll need.
BNC to Motorola Adapter : Adapters | RadioShack.com
BNC to Motorola Adapter : Adapters | RadioShack.com
- Status
Similar threads
