W8WCA
Member
This just shows my radio area of my radio-computer room
Recent radio setup
- Thread starter W8WCA
- Start date
- Status
Cool! What all are you running there on the computers?
Looks good! You must have small feet. 
Or long arms
W8WCA
Member
Yes do not sit clear up to desks
Old Dual Core Intel Windows 10 Machine for Radios
SpectraVue for my SDR-IQ - PC-ALE for decoding ALE - ProScan for my SDS200 Sometimes SDR-Anywhere for the SDR so I can listen remotely
An Old (but powerhouse) HP Z400 (Hex Core Xeon CPU)
Running a Linux Box as a Gateway, Router, Firewall Email server - DNS Server - Media Server etc
CentOS 7 As I have been using RedHat since V 4.2 (An not RHEL 4 either!)
A RPi I just tinker with and a RPi/Jumbo Spot for D-Star comms
And not seen a newer Dell Hex Core Intel Desktop for doing 3D / CAD work with AutoDesk Inventor
Old Dual Core Intel Windows 10 Machine for Radios
SpectraVue for my SDR-IQ - PC-ALE for decoding ALE - ProScan for my SDS200 Sometimes SDR-Anywhere for the SDR so I can listen remotely
An Old (but powerhouse) HP Z400 (Hex Core Xeon CPU)
Running a Linux Box as a Gateway, Router, Firewall Email server - DNS Server - Media Server etc
CentOS 7 As I have been using RedHat since V 4.2 (An not RHEL 4 either!)
A RPi I just tinker with and a RPi/Jumbo Spot for D-Star comms
And not seen a newer Dell Hex Core Intel Desktop for doing 3D / CAD work with AutoDesk Inventor
Last edited:
Great setup!
JDrisc3480
Member
Very impressive. Can we see a pic or two of the antennas?
W8WCA
Member
Most Discones and Scantenna's (Along with some 90 Ft Wires and a Slinky Dipole - are in the Attic
I will get outside pic tomorrow
A Hustler 6BTV Ground Mounter
and a OCFD Under the gutter apx 33 Ft Lg
I will get outside pic tomorrow
A Hustler 6BTV Ground Mounter
and a OCFD Under the gutter apx 33 Ft Lg
K4EET
Chaplain
@W8WCA. nice setup you have there. I see two hotspots on the left wing. If I may ask, what manufacturer and model are those and what are they used for? DMR, Yaesu Fusion, etc. and shouldn't they be on the top shelf? I am looking to get a hotspot for DMR operation at first and Yaesu Fusion later since that means I need two new HTs.
73, Dave K4EET
73, Dave K4EET
W8WCA
Member
1 is just a Raspberry Pi 3 I use for tinkering (and IRC)
the other is a Raspberry Pi - JumboSpot for D-Star.
So I can use my TH-D74 in side as I cannot hit the D-Star Repeater inside.
the other is a Raspberry Pi - JumboSpot for D-Star.
So I can use my TH-D74 in side as I cannot hit the D-Star Repeater inside.
W8WCA
Member
Here is my Under the gutter OCFD Held up with those 3M Stick on Hooks that you can remove too.
W8WCA
Member
- Status
