• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Request Help For Icom F51V

Status
Not open for further replies.
M

mathok

Newbie
Joined
Mar 1, 2014
Messages
1
Hi
I have a F51V(Handheld), It can be transport information by RS 232C Port.(I have other equipment send and receive the information by RS 232 port.)

Now, I want to look for a new equipment for transport the information like F51V.
I find a setting in the F51V for the transport information, at Model=>Common=> Common=>RS-232C=>Mode=>Tr.Modem.

I can transport information at this mode.

Who can help me look for a new ICOM Equipment for it? I hope the equipment is a mobile mode(Like can use in the car)
I check a equipment F5061D, It has Print, GPS, PC CMD,PC CMD V2. Do not have Tr.Modem.

Does someone know what about the Mode: Tr.Modem equipment?

Thanks lot!
 
Status
Not open for further replies.

Similar threads

W
Icom IC-F5021 tone problem
Replies
6
Views
1K
W7EKB
W
KD7RJC
C4FM/Fusion, APRS-like data on data port?
Replies
9
Views
2K
16b
16b
W
Kenwood: Kenwood TH-F6A Lost Extended Range?
Replies
4
Views
694
WirelessMike
W
S
MERA upgrade nears conclusion
Replies
1
Views
600
officer_415
officer_415
Napalm
R8600 Icom R8500 vs R8600
2 3 4
Replies
68
Views
5K
Napalm
Napalm
Top