Rocky Point FD Frequencies

[FallenAnjel]

I have a Pro-164 Radio Shack scanner that I use with a rubber duck antenna. I pick up Rocky Point (my hometown) and two neighboring towns with no problems even with the hills. As of today I'm just picking up intermittent static as if they're 10 miles away.

I have three frequencies for Rocky Point Fire department:

453.67500 Rocky Point Fire Dispatch
482.02500 Rocky Point Fire Operations
458.50000 Rocky Point Fireground

the tones go out on the 453. the rest of the transmissions are on 482. IDK if anything ever comes up on 458. Are there any new frequencies for RP? did they do something with their radios or anything? I hear the tones and the base give out the call but that's it.

Thanks for any help.

 

[scannerman5555]

the 458 is low power freq car relays port radios

 

[FallenAnjel]

Ok so that's why I don't hear anything, so maybe they are using that frequency now? This stinks! I hope something changes soon.

 

[KC2zZe]

Their FCC call sign WQCM954 also authorizes them on 458.7000 and 458.9500. In addition, WPQA876 authorizes them on 46.0200. Are any of these any help?

 

[ipfd320]

You can try 482.5625 the 46.400 cross Band Repeater--im in Bay Shore and have heard Some Ops on this Freq and also on the 453 freq you posted

 

[scannerman5555]

I'm in Brentwood
disp 453.675
F/G 482.02500

 

[scannerman5555]

I'm in Brentwood
disp 453.675
F/G 482.02500

 

[FallenAnjel]

Their FCC call sign WQCM954 also authorizes them on 458.7000 and 458.9500. In addition, WPQA876 authorizes them on 46.0200. Are any of these any help?

Thank! I'll try those and let you know. I'm thinking it might be the scanner tho. I posted earlier about Suffolk PD breaking up and someone said it was out of tune. I tuned it but now the RPFD is coming in all fuzzy. So I may have to adjust the tuning. However I think I stopped hearing things before I did the adjusting.

I'll update soon.

 

[w2lie]

Make sure you don't have a "G" in your display. That is the Global Attenuator, and it is very easy to set accidentally. If you have the "G" on the top line, press Func+ATT to disable the attenuator.