• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

RPM R13 vs R14

Status
Not open for further replies.

bcfd346

Member
Premium Subscriber
Joined
Dec 21, 2007
Messages
6
Location
Stockbridge, GA
If you program a radio with R14 software, can you go back and reprogram with R13 software? I do not want to lose the non-affiliation feature.

Thanks,
Jeffrey LeMaster
 

rescue161

KE4FHH
Database Admin
Joined
Jun 5, 2002
Messages
3,634
Location
Hubert, NC
I think you can still write to the radio with R13, but you will not be able to read a radio with R13 that has been written to with R14. We go back and forth between R10B and R14 from time to time, so I would imagine that R13 would be no different. Not sure what you mean, but the receive-only check box is still available in R14.
 
Status
Not open for further replies.
Top