RS 20-47 Install

[plmanegre]

Having a problem trying to find if I installed this correctly. When I click on removable E , I find folders fo various MS sys. I click on XP and get find info That i dont understand. What im trying to say, should I unistall { can you}. This is my second disk, They were kind enough to give me a newone. Thank Phil Im using win97. Ivew tried to download to scanner, but nothing appears to happen. This is the reason for question. Again thanks

 

[SCPD]

follow instructions with the CD. Install driver BEFORE you plug in the cable. then make sure comoports in system devices & in the S/w match up

 

[plmanegre]

I followed the instuctions. I tried twice with two out of package cds but, but if i was to follow the instructions as printed, i"m supposed to plug in cable is #2 on instuctions. I do appreciate the assist spoke with two diff. folks at diff stores. they were confused. so back to stage one. thanks again phil

 

[SCPD]

ok, try uninstalling what you have done so far from the system devices page, then reboot with CD in the computer & try it again... then after your reboot , plug cable in & make sure the comports are matching up .also try the updated driver dL here RadioShack.com
Good luck & try & be patient!.. it's apain sometimes for sure!!
Paul

 

[plmanegre]

win97

thanks everyone for all your help. I believe i have fig it out. I was using the com 3 instead of c4. Anyway,one more question. I used the "download to scanner" . I think that maybe I was not supposed to do this. Now all my freq are somewhere other than where they should be. can I get them back or start from scratch. Might be a good time to clean it up. Thanks again. Phil

 

[Evert]

……… I used the "download to scanner" …..

The choices are:
Download from Scanner
Upload to Scanner

The wording is from the viewpoint of the computer. So if you want to send data to the scanner you should choose “Upload to Scanner”.

If you Downloaded the data from the scanner to the software it should have created a new tab called "from scanner" which could be saved to a new file. If you chose the original file name you would have overwritten the original file, in which case you will have to start over.