RS Pro 668 Question

Status
Not open for further replies.

usmiladim

Member
Joined
Jul 22, 2016
Messages
178
Location
Macedonia Ohio
Hello

Can someone please tell me how to have my display time out after like 5 or 10 seconds? I played with the LITE options in settings numbers, but it’s still never goes out while in play mode. I hope I explained it well enough.

Thank you
Milan
 

usmiladim

Member
Joined
Jul 22, 2016
Messages
178
Location
Macedonia Ohio
Page 18 of your manual!
But after looking at these three options, I still can’t get this damn light to turn off. Can you please advice what number or setting the three should be on? All I want is for the display light to go off after 3-5 seconds and light up on a scan frequency pick-up.

Thanks Kindly

Milan
 

jonsmth

Member
Joined
Dec 20, 2006
Messages
81
Location
Peru, MA
I have a PRO-668. I've never tried to change the light settings. I do notice that when the scanner has power applied via the Mini-USB connector, the display light stays on constantly. However, when the scanner is running on just batteries, the display seems to do what you would like for it to do; light up when any of the keys are depressed and stay on approx. 5 secs then extinguish.
 

jonsmth

Member
Joined
Dec 20, 2006
Messages
81
Location
Peru, MA
See my suggested settings attachment. There are 2 settings. 1 for battery and one for USB.
See my suggested settings attachment. There are 2 settings. 1 for battery and one for USB.
Swipsey, I appreciate the information. I never knew there were settings for the display light. That will certainly come in handy to
have the display go dark after a few seconds, especially when using the scanner in my Truck at night.
 
Status
Not open for further replies.
Top