RWC: Phoenix Fire on Simulcast C?

Status
Not open for further replies.

FireChaplain

Member
Premium Subscriber
Joined
Jul 24, 2013
Messages
50
Location
Chandler, AZ
My BCD396T is operating correctly and I uploaded programming for RWC Simulcast C (control channels only) and all talkgroups for Phoenix Fire. I have not scanned since February, but I used to receive all talkgroupss off of Simulcast C with zero problems. The scanner is receiving and I can hear Phoenix PD, but I can't hear any fire talkgroups. Any advice?
 

ICP963

Member
Joined
May 17, 2003
Messages
246
Location
Chandler, AZ
I have been told by a reliable source that Fire and most other users have been transitioned off of C while it gets rebuilt. Try looking for Fire on the South Mountain site for the time being.

My BCD396T is operating correctly and I uploaded programming for RWC Simulcast C (control channels only) and all talkgroups for Phoenix Fire. I have not scanned since February, but I used to receive all talkgroupss off of Simulcast C with zero problems. The scanner is receiving and I can hear Phoenix PD, but I can't hear any fire talkgroups. Any advice?
 

KB7MIB

Member
Joined
Aug 17, 2003
Messages
3,754
Location
Peoria, AZ.
Wirelessly posted (Opera/9.80 (BREW; Opera Mini/6.0.3/27.2354; U; en) Presto/2.8.119 320X240 LG VN530)

Try the South Mtn site, the White Tanks site, Simulcast B (Phoenix) or Simulcast F (Tempe) for fire.
Apparantly, Simulcast C is being transitioned to 700 MHz frequencies from the current 800 MHz frequencies, and possibly to P25 Phase II from the current Phase I, although I'm not positive about the Phase II.
There's another thread here in regards to the transition.
 
Status
Not open for further replies.
Top