Not sure. If you hit apply current band plan you should be good to go. But you may have to restart it. Just make sure for range #1 you enter 802. Then just enter your way through the rest.
SAFE-T Rebanding
- Thread starter scannerfreak
- Start date
- Status
Not sure. If you hit apply current band plan you should be good to go. But you may have to restart it. Just make sure for range #1 you enter 802. Then just enter your way through the rest.
usswood
Member
Its working correctly now...reporting the right Freqs...checking the Paxton site now!
Paxton reconfirmed...all data is correct!
Graysville update: ADD 851.1375 Voice Channel
Thank you
Last edited:
Got it. Thanks!
That is correct, but the site belongs to Zone 4 
usswood
Member
Vigo site looks good....except change the ACC to the 852.8000 and its done!
usswood
Member
500 needed a custom table add for the Vigo Tower to track properly
Done, thanks!
usswood
Member
Clinton, IN
Site: 34 ; Site name: CLINTN ; Connect Tone 90.00hz ; Max loading 4 channels
851.3375
853.8125
856.7625 ACC
859.7625 PCC
852.9000
Site: 34 ; Site name: CLINTN ; Connect Tone 90.00hz ; Max loading 4 channels
851.3375
853.8125
856.7625 ACC
859.7625 PCC
852.9000
Got it! Thanks a ton.
jwheatley
Member
Looks like New Castle has rebanded. Don't have Unitrunker so I am not able to provide CC info.
usswood
Member
Newport, IN
Site: 04 ; Site name: NEWPRT ; Connect tone: 83.72hz ; Max loading 4 channels
851.9750
857.9625
858.5125
858.9625 ACC
859.9625 PCC
Site: 04 ; Site name: NEWPRT ; Connect tone: 83.72hz ; Max loading 4 channels
851.9750
857.9625
858.5125
858.9625 ACC
859.9625 PCC
Updated, thanks
SAFE-T Rebanding: 860 Mhz Frequencies
As re-banding continues, yesterday's frequency changes of the control channels at Newport further re-inforce the need for a "boots on the ground" confirmation of changes.
While rebanding "should only" require a 15Mhz shift down in frequency, sometimes things are changed. Thanks to everyone who is helping with confirmation by reporting any and all changes - especially those running decoder programs like TRUNKER, UNITRUNKER, and TRUNK88.
Most of the sites that have had "more radical" changes have been ones that are currently utilizing 860.xxxx Mhz frequencies on primary and alternate control channels. Six of these "type" of sites remain to be rebanded:
ISP D13 - Summit - LaPorte County
ISP D13 - Wanatah - LaPorte County
ISP D13 - Winamac - Pulaski County
ISP D21 - Elkhart - Elkhart County
ISP D33 - Martinsville - Morgan County
ISP D52 - Indiana Government Center - Marion County
As re-banding continues, yesterday's frequency changes of the control channels at Newport further re-inforce the need for a "boots on the ground" confirmation of changes.
While rebanding "should only" require a 15Mhz shift down in frequency, sometimes things are changed. Thanks to everyone who is helping with confirmation by reporting any and all changes - especially those running decoder programs like TRUNKER, UNITRUNKER, and TRUNK88.
Most of the sites that have had "more radical" changes have been ones that are currently utilizing 860.xxxx Mhz frequencies on primary and alternate control channels. Six of these "type" of sites remain to be rebanded:
ISP D13 - Summit - LaPorte County
ISP D13 - Wanatah - LaPorte County
ISP D13 - Winamac - Pulaski County
ISP D21 - Elkhart - Elkhart County
ISP D33 - Martinsville - Morgan County
ISP D52 - Indiana Government Center - Marion County
Hey M can you PM me or post this info? Is this 008 or 038 that needs this? Have a RS PRO 106 same as the 500 using Win500 to make the changes- was listening yesterday evening and wondered why things were so quiet LOL. Now gotta do the same thing to the others
usswood
Member
Hey M can you PM me or post this info? Is this 008 or 038 that needs this? Have a RS PRO 106 same as the 500 using Win500 to make the changes- was listening yesterday evening and wondered why things were so quiet LOL. Now gotta do the same thing to the others
Hey James...Site 08 was working fine when they changed it, however site 38 (the downtown tower) wouldn't track properly without the custom plan added..I also had to change the setting to custom in the scanner also...hope this helps sir!
haha........I answered my own question. By "custom table" you mean "800 MHZ Rebanded". Supposedly rebanded freqs that have a "5" in the 4th decimal place dont need the 800 rebanded table. Those that have a "0" in the 4th decimal place will need it. Thats why one site needs the table and the other doesnt. Thanks M for the reply good to hear from you.
Mashall site has been corrected based on monitoring with TRUNK88:
;;[Zone 7829-11]
Name = "MARSHALL"
Alias = "MARSHL"
Connect Tone = 97.30
Neighbour = 7829-04 NEWPRT NEWPORT
Neighbour = 7829-22 BRIDGE BRIDGETON
Neighbour = A40A-29 CRAWFO CRAWFORDSVILLE
Neighbour = A40A-30 COVING COVINGTON
35, 0, 851.8875, 0, 0, 0, 1
259, 0, 857.4875, 0, 0, 0, 2
299, 0, 858.4875, 0, 0, 1, 0 ; ACC
306, 0, 858.6625, 0, 0.0000, 0, 0, 2, 0 ; PCC
554, 0, 853.8750, 0, 0, 0, 2
;;[Zone 7829-11]
Name = "MARSHALL"
Alias = "MARSHL"
Connect Tone = 97.30
Neighbour = 7829-04 NEWPRT NEWPORT
Neighbour = 7829-22 BRIDGE BRIDGETON
Neighbour = A40A-29 CRAWFO CRAWFORDSVILLE
Neighbour = A40A-30 COVING COVINGTON
35, 0, 851.8875, 0, 0, 0, 1
259, 0, 857.4875, 0, 0, 0, 2
299, 0, 858.4875, 0, 0, 1, 0 ; ACC
306, 0, 858.6625, 0, 0.0000, 0, 0, 2, 0 ; PCC
554, 0, 853.8750, 0, 0, 0, 2
Pendleton is rebanded with control channel as 853.875 as expected.
usswood
Member
Brazil, IN
Site: 028 ; Site Name: BRAZIL ; Connect Tone: 83.72 ; Max Loading 4 channels
852.4375
857.4625
858.4625
858.7375 ACC
859.4625 PCC
Neighbour List for 7829 zone 28 (Brazil)
SysID Zone Band Alias -----PCC----- Zone Name
7829 03 800 PUTNMV 1021 (868.9250) Greencastle
7829 08 800R TERREH 348 (859.7125) Terre Haute
7829 14 800 JASONV 695 (868.3875) Jasonville
7829 22 800R BRIDGE 118 (853.9625) Rockville
7829 34 800R CLINTN 350 (859.7625) Clinton
7829 38 800R VIGO 83 (853.0875) Terre Haute
A40C 27 800R SPENCR 102 (853.5625) Spencer
Site: 028 ; Site Name: BRAZIL ; Connect Tone: 83.72 ; Max Loading 4 channels
852.4375
857.4625
858.4625
858.7375 ACC
859.4625 PCC
Neighbour List for 7829 zone 28 (Brazil)
SysID Zone Band Alias -----PCC----- Zone Name
7829 03 800 PUTNMV 1021 (868.9250) Greencastle
7829 08 800R TERREH 348 (859.7125) Terre Haute
7829 14 800 JASONV 695 (868.3875) Jasonville
7829 22 800R BRIDGE 118 (853.9625) Rockville
7829 34 800R CLINTN 350 (859.7625) Clinton
7829 38 800R VIGO 83 (853.0875) Terre Haute
A40C 27 800R SPENCR 102 (853.5625) Spencer
- Status
