I purchased an sbe optiscan scanner off of ebay. Received the programming book, but there was no program card. Any idea other than ebay where i could find cards for this scanner. I looks in new condition. Thanks for the help
Sbe optiscan model sbe-12sm
- Thread starter bryank104
- Start date
- Status
- Joined
- Jun 27, 2002
- Messages
- 1,928
SBE optiscan
Thank for the help. Im going to try the card stock trick
Thank for the help. Im going to try the card stock trick
I had one of these scanners back in the day. Pretty poor by modern standards. Overloads easily and lots of intermods and birdies. Wrote some software at one time to program the radio. No longer have the radio, but have a lot of cards.
Any interest in getting rid of the cards
Some where in my radio room I have a few of the cards, never used. if I can find them I will let you know.
SBE optiscan
Thank you i really appreciate it
Thank you i really appreciate it
byndhlptom
Member
SBE Cards
I made this up a long time ago. If you print on card stock or Adhesive paper (then transfer to a card stock. These will work.
good luck
$.02
I made this up a long time ago. If you print on card stock or Adhesive paper (then transfer to a card stock. These will work.
good luck
$.02
byndhlptom
Member
SBE cards
Forgot to add.
A dark/opaque card stock works best. If the hole is not cut out, it needs to block light. I found that the heavy blue and black binders worked well, just be mindful of overall card thickness.
$.02
Forgot to add.
A dark/opaque card stock works best. If the hole is not cut out, it needs to block light. I found that the heavy blue and black binders worked well, just be mindful of overall card thickness.
$.02
byndhlptom
Member
SBE Optiscan cards
Found this, looks official...
.pdf of SBE cards
$.02
Found this, looks official...
.pdf of SBE cards
$.02
oracavon
Member
That's the one I created myself and attached to my post at http://forums.radioreference.com/al...-vintage-scanner-help-wanted.html#post2653943.
Please refer to my instructions in that post to avoid any problems. They work well for me.
Also, see my post at http://forums.radioreference.com/al...-vintage-scanner-help-wanted.html#post2654376 for the correct size hole punch to match those cards.
Note: In comparing that file to my original one, I note that some modifications were made to the PDF. I strongly suggest that you stick with my original PDF in my above-referenced post, as I have no idea who modified it or why.
Last edited:
- Status
